LOBADUR® Viva is compatible with all Connected Systems approved wood flooring adhesives from Wakol. This gives you maximum security for renovations and new installations, as chemical reactions between finish and adhesive are eliminated

Range of use Application

• Excellent resistance to household chemicals
• Long-lasting beauty of the floor – high resistance to mechanical wear and line marks
• Low emission
• Time saving – fully durable after only 5 days

1K water-based finish for wood floors.

Uses:

For normal to heavy traffic in residential areas and light commercial use.
Excellent for renovations and new installations.

• Excellent application qualities – easy to use and safe, no lap marks
• Highly resistant to plasticizers from wood flooring adhesives
• Maximum safety for renovations and new installations
• Low emission, EMICODE® EC2 • Low VOC content, GISCODE W2+
• Available in Satin and Semi-Gloss
• Compatible with LOBA primers like EasyPrime and AmberPrime and fillers like EasyFill

Application Process:

•  Sand and remove dust from the surface properly
• The use of a primer is recommended (e.g. LOBADUR® EasyPrime)
• First coat of Viva with LOBATOOL roller Microfaser 100-120 (or T-bar, Trim Pad, Lambswool, Brush)
• Allow to dry for 2-3 hours • Intermediate sanding with150 grit • Second coat of Viva with LOBATOOL roller Microfaser 100-120 (or T-bar, Trim Pad, Lambswool, Brush)

Coverage: 500-600 square feet per gallon.