hardwood floor acclimationWhen it comes to premium floor finishes, Bona Traffic HD® stands out for its unsurpassed scuff, scratch, and chemical resistance. Whether you're a homeowner aiming to protect your hardwood investment or a flooring professional looking for the industry's best performance, this guide will walk you through how to properly use Bona Traffic HD and maximize your results.

What is Bona Traffic HD®?

Bona Traffic HD® is a two-component waterborne finish known for:

  • Exceptional durability in both commercial and residential settings.
  • Very low VOCs, nonflammable formulation, and a non-offensive odor.
  • Full cure in just 3 days, with 80% cure achieved within 24 hours.
  • GREENGUARD GOLD certification, ensuring eco-friendly indoor air quality.

It's ideal for locations like shopping malls, offices, restaurants, hospitals, schools, and homes where performance cannot be compromised.

Bona Traffic HD Product Types

To tailor your project to the exact sheen level desired, Bona offers several versions of Traffic HD:


Step-by-Step Application Process

1. Floor Preparation

  • Sand floors following NWFA standards.
  • For stained floors: final cut with 80-100 grit, multi-disc with 80-120 grit.
  • For unstained floors: final cut with 80-120 grit, multi-disc with 120-150 grit.
  • Thoroughly clean with a vacuum and a dry Bona Microfiber Cleaning Pad.


2. Mixing Bona Traffic HD

  • Shake Part A (finish) vigorously for 30 seconds.
  • Add Part B (hardener) at a 1:11.33 ratio (one bottle per gallon).
  • Shake the mixture again for 30-45 seconds.
  • Insert the provided filter and allow to sit for 5-10 minutes before use.

Important: Bona Traffic HD cannot be re-hardened once mixed. Use the mixture within 4 hours.


3. Applying the Finish

  • Pour a 6” wide line of finish along the starting wall.
  • Use a Bona Floor Coater, Roller, or Cut-In Pad.
  • Maintain a wet edge by snowplowing the applicator.
  • Drying time between coats is typically 2-3 hours.

Recommended Coverage: 350-400 square feet per gallon.

  • Use Bona Diamond abrasives (180-240 grit) for smoothest results.
  • Vacuum and tack between coats.

5. Curing Time

  • Light foot traffic after 24 hours.
  • Full cure at 3 days.
  • Delay placing area rugs until fully cured.


Maintenance Tips

  • Only dry mop with a Bona Microfiber Mop during the first week.
  • Use Bona Hardwood Floor Cleaner for regular maintenance.
  • Place felt pads under furniture.
  • Install walk-off mats at entryways to reduce dirt and grit.


Pro Tips for Optimal Results

  • Three Coats: Apply three coats in high-traffic areas for extra durability.
  • Climate Control: Apply in conditions between 65-80°F and 40-60% humidity to ensure proper drying.
  • Test First: Always prepare a sample or test area, especially when working with exotic or oily wood species.
  • Separate Applicators: Use a clean applicator for stain/sealer and a separate one for finish to prevent contamination.


Conclusion

Bona Traffic HD® delivers professional-grade protection and beauty with easy application and eco-conscious performance. Whether you're renovating a home or finishing a commercial project, mastering the use of this premium waterborne finish will ensure stunning, lasting results.